SM545 Checker Plate Rubber Matting Single & Five Bar is a general purpose rubber matting with a ‘Checker Plate’ pattern design on one side and a cloth impression pattern on the reverse. Available in two standard thickness’ in Black and Grey 3mm and 4.5mm and in Blue and Green at 3mm only. Ideally suited for walkways, tread mats, runners and general purpose industrial applications where a multi directional tread pattern is required.
This grade can be produced in varying width, length and thickness formats and in a variety of colours to special order. These would be subject to minimum batch run quantities, usually 500 M2 per size/colour
| Stock Roll Sizes [m x m x mm] |
Weight [kg/M2] |
Specifications Compound |
Values [typical] |
|---|---|---|---|
| Single Bar – 545-1 | Colour: | Black/Grey/Blue /Green |
|
| 10m x 1.2m x 3.0mm Black | 4.50 | Compound: | SBR/NR |
| 10m x 1.2m x 4.5mm Grey | 6.75 | Hardness [Shore A]: | 70° |
| 10m x 1.2m x 3.0mm Black | 4.50 | Density [SG]: | 1.5 |
| 10m x 1.2m x 4.5mm Grey | 6.75 | Tensile Strength: [MPA] | 3.0 |
| Five Bar – 545-5 | Elongation [min]: | 150% | |
| 10m x 1.2m x 3.0mm Black | 4.50 | Abrasion Resistance [mm³] | 250 |
| 10m x 1.0m x 3.0mm Grey | 4.50 | Minimum Temperture | -20°C |
| 10m x 1.2m x 3.0mm Blue | 4.50 | Maximum Temperture | +70°C |
| 10m x 1.0m x 3.0mm Green | 4.50 | ||
| 10m x 1.2m x 4.5mm Black | 6.75 | ||
| 10m x 1.2m x 4.5mm Grey | 6.75 |